Book Inspection

 

 

Just how do you feel on the subject of What Would Cause My Electric Water Heater to Stop Working??

Numerous modern residences utilize an electric hot water heater for their heating unit, due to its comfort as well as ease of use. However, much like any other electrical devices, issues might occur with its use, suddenly. It can be really irritating to get up to a cool shower rather than a hot one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the case might be, water heater troubles can be rather aggravating. Thankfully, we have actually made a listing of feasible solutions to your hot water heater issues. There are a number of variables that might create a lot of these troubles, it could be a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for safety. Whatever the issue is, getting it fixed ought to not present too much of a problem if you adhere to these steps:

 

Call An Expert:

If after changing all defective components and also resetting your temperature, the water heater still isn't functioning, you might need to call an expert plumber for an expert viewpoint. The trouble with your heater could be that the cold and hot faucets have been switched or it might be undersized for the quantity of hot water needed in your house. Whatever the situation might be, a specialist plumber would assist fix the trouble.

 

Check Your Power Supply:

As fundamental as this might seem, it is really essential. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, merely transform it off and on again. Replace any type of damaged or damaged fuse. Examine the device with power after these changes to see if it's currently functioning.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may require to examine the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the gain access to panel as well as press the red button for temperature reset above the thermostat. This must assist heat up the water. Turn the circuit breaker back on as well as inspect if the issue has actually been dealt with.

 

Check the Heating Element in the Hot Water Heater:

If it's not a power trouble, after that try taking a look at your burner if it is still functioning. Examine each of your heating elements to be sure the trouble isn't with any of them. If any one of them is damaged, change that component and afterwards examine whether the hot water is back on.

 

Conclusion

Water heater problems are not always major. A lot of them are due to minor issues like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I ran across that blog posting on What Would Cause My Electric Water Heater to Stop Working? while doing a lookup on the search engines. In case you enjoyed reading our blog entry please remember to share it. Bless you for your time. Don't hesitate to check our blog back soon.

Book Appointment